Abstract: This talk covers the ejection of particles from comets to the initial formation of a…
Author: New NASA STI
Ionic Polyimides: New High Performance Polymers for Additive Manufacturing [STUB]
Abstract: There is currently a very limited set of engineering polymers that have been demonstrated as…
Acoustic Methods Used in the NASA Glenn 9- by 15- Foot Low-Speed Wind Tunnel
Abstract: The 9- by 15-Foot Low Speed Wind Tunnel has been used for acoustic testing for…
Effect of Additives: Gamma-Ray Sensors Based on Ionizing Organic Nanocomposites [STUB]
Abstract: We have developed ionizing organic-based composites which have demonstrated great promise for radiation sensing. Nickel…
Last Hop Options for DTN
Abstract: It is possible to use a Delay Tolerant Network (DTN) to transport data and/or commanding…
Space Qualified 200-Watt Q-band Linearized Traveling-Wave Tube Amplifier [STUB]
Abstract: L3 Technologies Electron Devices Division, (L3 EDD) and L3 Technologies Narda Microwave West (L3 NMW),…
Impact of Powder Variability on the Microstructure and Mechanical Behavior of Selective Laser Melted Alloy 718 [STUB]
Abstract: Powder-bed additive manufacturing processes use fine powders to build parts layer-by-layer. Alloy 718 powder feedstocks…
Surface Modification at Nanoscale; Nanoparticle-Nanowire Transition [STUB]
Abstract: Binary, ternary and quaternary oxides and selenides have been developed and used in multiple applications…
Aerodynamic Conceptual Design of Boundary Layer Ingestion Propulsor Systems: A Quasi-2D Through Flow Analysis Method and Multi-Fidelity Propulsor Design Framework
Abstract: A propulsor design framework for maximizing the benefits of boundary layer ingestion is presented. The…
Addressing Human Error in International Space Station Flight Control Teams: Advances in Ground Training for Science Operators
Abstract: In flight control, as with any human in the loop system, operator error is an…