Group Combustion Module (GCM): The crew completed closeout operations in the Multi-Purpose Small Payload Rack 1 (MSPR1) for the GCM investigation that was completed this week. The Group Combustion investigation tests combustion changes of fuel sprays as flames spread across a cloud of droplets. In the MSPR fuels are arranged randomly on thin-fiber lattice points and the flame and droplet positions and temperature distribution are measured as the flame spreads. Microgravity blocks convection, which on Earth would quickly disperse the droplets and combustion products before such measurements could be made. Fine Motor Skills (FMS): A crewmember completed a session of the FMS investigation which studies how the fine motor skills are effected by long-term microgravity exposure, different phases of microgravity adaptation, and sensorimotor recovery after returning to Earth gravity. The goal of the investigation is to determine how fine motor performance in microgravity varies over the duration of six-month and year-long space missions; how fine motor performance on orbit compares with that of a closely matched participant on Earth; and how performance varies before and after gravitational transitions, including periods of early flight adaptation and very early/near immediate post-flight periods. Food Acceptability: The crew completed a Food Acceptability questionnaire. The investigation seeks to determine the impact on food acceptability on ISS of repetitive consumption of food currently available from the spaceflight food system. Results will be used in developing strategies to improve food system composition to support crew health and performance on long duration missions. Biolab: As part of the routine maintenance for the Biolab, the crew exchanged Biological Isolation Filters and the Cold Spot Sponge. The BioLab is a multiuser research facility located in the Columbus laboratory. It is used to perform space biology experiments on microorganisms, cells, tissue cultures, small plants, and small invertebrates. BioLab allows scientists to study the effects of microgravity and space radiation on biological organisms. Potable Water Dispenser (PWD) Sample Collection: The crew collected water samples from the PWD for in-flight and post-flight microbial and coliform analysis. This is a regularly scheduled activity that is performed multiple times throughout the expedition to verify water safety. Water Processing Assembly (WPA) Increasing Water Conductivity: As expected, there is an increasing trend in the conductivity of water measured in the WPA between the two Multi Filtration Beds (MF Beds). The increase in conductivity likely indicates the predicted acetate breakthrough of the first MF bed. When water conductivity between the two MF beds stabilizes, a sample will be collected and returned to the ground for analysis to confirm that the conductivity increase is due to acetate breakthrough. If the ground determines that the conductivity increase is due to a different contaminant that is harmful to the Catalytic Reactor, one or both of the MF Beds would need to be replaced. Today’s Planned Activities All activities were completed unless otherwise noted. Atmosphere Control and Supply (ACS) Nitrogen Manual Valve Close Biolab Incubator Biological Isolation Filters and Cold Spot Sponge Exchange Combustion Integrated Rack Alignment Guide Install Coliform Water Processing Potable Water Dispenser (PWD) Sample Collect TOCA Potable Water Dispenser (PWD) Sample Analysis Fine Motor Skills Experiment Test – Subject Food Acceptability Questionnaire – Subject Fluid Shifts Dilution Measures Setup Group Combustion Module (GCM) Gas Bottle Unit Air (GBU) Closeout Habitability Human Factors Directed Observations – Subject Health Maintenance System (HMS) Automated External Defibrillator (AED) Inspection Inventory Management System (IMS) Conference JEM Camera Robot Activation JEM Camera Robot Stow Long Duration Sorbent Testbed Inlet Filter Change. Multi-purpose Small Payload Rack (MSPR) Combustion Chamber (CC) Closeout/Removal Multi-purpose Small Payload Rack (MSPR) /Group Combustion Module (GCM) Component Deactivation Exp 50/51/52 Payloads Mid-Mission Debrief Regenerative Environmental Control and Life Support System (ECLSS) Recycle Tank Drain Part 1 and 2 Regenerative Environmental Control and Life Support System (ECLSS) Recycle Tank R&R RGN WSTA Fill Rodent Research Access Unit Clean Water Refill Kit Battery Charge Test Video Recording for Russia Today TV Channel VIZIR. SM Panels 114 and 116 Outfitting for CКПФ-УМ Payload NAPOR-mini RSA. Cleaning Onboard Memory Storage БЗУ-М vents Preventive Maintenance of FS1 Laptop BRI and Network Adapter (АСП) Power Up. Express check of nominal network configuration after monthly BRI cleaning Monthly BRI Cleaning (start) SM panel 229A replacement Connecting Power Cables and Ethernet. Network Adapter (АСП) and cable harness/w couplers routing fit check in MRM2 for future Payloads Closeout ops with Network Adapter (АСП) and cable harness/w couplers routing fit check in MRM2 for future Payloads RADIOSKAF. Deactivation of Tanyusha-ЮЗГУ-1 satellite and antenna cable RADIOSKAF. Connecting antenna cable and activating Tanyusha-ЮЗГУ-1 satellite Soyuz 735 Kazbek Fit Check Preparation of Reports for Roscosmos Web Site and Social Media Flush СРВК-2М Water Conditioning Unit Purification Columns [БК БКВ] (end) Maintenance activation of Atmosphere Purification System Emergency Vacuum Valves [АВК СОА] from the Spares Kit ECON-M. Observation and Photography Completed Task List Items Genes in Space/Biomolecule Sequencer Hardware Stow Exp 50/51/52 Payloads Mid-Mission Debrief Ground Activities All activities were completed unless otherwise noted. SSRMS Direct Drive tests Three-Day Look Ahead: Friday, 07/07: Fluid Shifts, JSSOD#7 CubeSat deploy, Meteor hard drive swap Saturday, 07/08: Crew off duty, housekeeping Sunday, 07/09: Crew off duty QUICK ISS Status – Environmental Control Group: Component Status Elektron Off Vozdukh Manual [СКВ] 1 – SM Air Conditioner System (“SKV1”) Off [СКВ] 2 – SM Air Conditioner System (“SKV2”) On Carbon Dioxide Removal Assembly (CDRA) Lab Standby Carbon Dioxide Removal Assembly (CDRA) Node 3 Operate Major Constituent Analyzer (MCA) Lab Idle Major Constituent Analyzer (MCA) Node 3 Operate Oxygen Generation Assembly (OGA) Process Urine Processing Assembly (UPA) Process Trace Contaminant Control System (TCCS) Lab Full up Trace Contaminant Control System (TCCS) Node 3 Off